Home / Locations / Wakefield
INDEPENDENT HEAT PUMP DESIGN · WAKEFIELD, WEST YORKSHIRE
Independent heat pump design in Wakefield — from the designers based on your doorstep
Heat Loss Hub is Wakefield’s independent heat pump design consultancy. Room-by-room heat loss calculations, technical surveys and complete air source heat pump system designs for homes across the district — with no installation to sell and no brand to push. This is our home patch, and we’ve been inside its lofts and cellars for 18 years.
LOCAL KNOWLEDGE
We know Wakefield's housing stock brick by brick
Wakefield’s homes tell the story of its industry: solid-brick Victorian terraces around Thornes and St John’s, interwar semis lining the arterial roads out to Sandal and Alverthorpe, stone-built villages like Horbury and Ossett, colliery-era rows in Normanton, Featherstone and Castleford, and modern estates spreading from Durkar to Stanley. Each one behaves differently in a heat loss calculation — and each one gets condemned or flattered when a surveyor applies the wrong assumptions.
Working from West Yorkshire, we survey Wakefield homes in person, measure every room with LiDAR, and verify constructions rather than guessing them from age bands. Design conditions here sit around −3 °C — colder on the exposed ground toward Emley — and every design is calculated for exactly that, not a UK-wide average.
If you’re at the confused-by-quotes stage — three companies, three different heat losses, three different heat pumps — you’re precisely who we built this consultancy for. Read why quotes disagree, or skip ahead and get one measured answer.
WAKEFIELD HOMES, HONESTLY ASSESSED
What we typically find across the district
TYPICAL DESIGN FINDINGS — WAKEFIELD DISTRICT HOUSING (INDICATIVE)
| Housing type | Where you’ll find it | Typical heat loss | Usual design flow temp | Design notes |
|---|---|---|---|---|
| Victorian solid-brick terrace | Thornes, St John’s, Agbrigg | 6–9 kW | 48–52 °C | Chimney and floor-void losses dominate; draught-work pays first |
| 1930s bay-window semi | Sandal, Alverthorpe, Wrenthorpe | 5–9 kW | 45–50 °C | Cavity fill status is the swing factor — we verify, not assume |
| Colliery-era rows | Normanton, Featherstone, Sharlston | 5–8 kW | 45–50 °C | Compact forms help; check rear offshots and attic conversions |
| Stone village houses | Horbury, Ossett, Woolley edges | 7–12 kW | 48–55 °C | Wall thickness matters — 500 mm stone beats the “solid wall” default |
| Post-1995 estates | Durkar, Stanley, Outwood growth | 3–6 kW | 40–45 °C | Often heat-pump-ready with minimal radiator changes |
Ranges are indicative of our design experience, not a substitute for measurement — the whole point is that your house gets its own numbers.
WHAT WE DO IN WAKEFIELD
Three ways to get the design right before you commit
SERVICE 01 — FLAGSHIP
Independent Heat Pump Design
Full survey at your Wakefield home, room-by-room heat loss calculation and complete system design — then a vetted MCS installer builds it without alteration, grant paperwork included.
Explore the service →
SERVICE 02
Heat Loss Calculations
The measured facts about your home before any installer quotes — or professional calculations for Wakefield architects, builders and landlords.
See what's included →
SERVICE 03
Independent Design Reviews
Already collected quotes from Wakefield installers or national firms? We’ll tell you which one is right for your home — and which to walk away from.
Get quotes reviewed →
WHY LOCAL INDEPENDENCE MATTERS
Designed in Wakefield. Beholden to nobody.
National installers survey Wakefield homes from desks two hundred miles away; local firms are excellent at installing but rarely resourced for deep design work. We sit in the gap on purpose: a Wakefield-based design consultancy with 18 years of hands-on installation experience, no hardware to sell and no commissions taken — trusted by the architects, housing authorities and MCS installers who work this district every week.
Because we’re local, survey scheduling is easy, we know the stock (and its surprises — Wakefield’s cellars have opinions), and if your project needs a conversation at the kitchen table, that’s a short drive, not a video call with a salesperson.
DESIGNER'S INSIGHT
“Our case-study house is ten minutes from the office: a Sandal-side 1930s semi with three quotes spanning 5.9 to 11.2 kW. Measured properly it came out at 6.8. That house is Wakefield in miniature — decent bones, patchy improvements, and a heat loss nobody had actually calculated. Most of this city just needs measuring.”
Phil
Founder & Lead Designer — Wakefield based
WAKEFIELD QUESTIONS
Asked locally, answered honestly
More detail in the Advice Centre — or ask us about your street directly.
No — Wakefield is our home base. Survey visits across the district (and the wider WF postcodes) carry no travel supplement.
Almost certainly — Victorian terraces here typically design out at 6–9 kW and 48–52 °C flow once chimneys and floor voids are dealt with honestly. See our old-house guide, then let’s measure yours.
Your choice: any MCS installer you trust, or an introduction to our small vetted network working across West Yorkshire — installers who build our designs regularly, without alteration, and handle the Boiler Upgrade Scheme grant (£7,500, or £9,000 for oil/LPG homes from July 2026).
WAKEFIELD & DISTRICT
Your street, your construction, your numbers
Tell us about your Wakefield home through the short enquiry form. We’ll review it personally and reply by email with the most appropriate next step.